Sur quel écran rejouer Ocarina of Time, de retour le 5 novembre ?

Which monitor to replay Ocarina of Time on, back on 5 November?

The Legend of Zelda: Ocarina of Time comes out on 5 November 2026 on Nintendo Switch 2, and only on that console. Nintendo presents it as a remade version of the Nintendo 64 classic, with completely reworked visuals. In TV mode, the Switch 2 outputs at most a 3840 x 2160 pixel image at 60 frames per second, or a 1080p or 1440p image at 120 frames per second.

For the Switch 2's 4K, a 60 Hz monitor and an HDMI 2.0 port are all you need. The choice then comes down to space: a large format for the living room, a 27-inch for the desk.

 

The remake announced by Nintendo

Nintendo set the release for 5 November 2026, during the presentation dedicated to the 40th anniversary of The Legend of Zelda series. The game revisits the 1998 adventure with remade visuals, voiced cutscenes and a soundtrack performed by a symphony orchestra. It also recognises melodies played or hummed near the console, and a compatible electronic ocarina comes out on the same day.

A Nintendo Switch 2 in the colors of the series' 40th anniversary comes out on 29 October 2026. It has the same video outputs as the standard Switch 2: the choice of monitor is the same for either model.

Only the remake's resolution and frame rate remain unknown: Nintendo has not published them.

 

From the 4:3 television of 1998 to the 16:9 monitor

The 1998 version was designed for the Nintendo 64 and for the CRT televisions of the time, in 4:3 format and standard definition. The image fitted into an almost square rectangle.

A modern monitor is 16:9: at the same height, it is a third wider than a 4:3 monitor. A game remade for the Switch 2 is designed for that width, and no longer for the almost square rectangle of 1998.

Resolution has changed in the same proportions. A standard-definition CRT television displayed 576 visible lines in Europe. A 4K monitor displays 2160, almost four times as many.

 

The Switch 2 spec sheet, read with the monitor in mind

Nintendo publishes the console's video outputs in its spec sheet.

  • In TV mode, on the dock: maximum resolution of 3840 x 2160 pixels at 60 frames per second; 120 frames per second when the output is set to 1920 x 1080 or 2560 x 1440; HDR10 support.
  • In handheld and tabletop mode: the built-in monitor, a 7.9-inch 1920 x 1080 LCD, with HDR10 and a variable frequency of up to 120 Hz.

Two consequences for the TV-mode monitor. 4K at 60 frames per second goes through an HDMI 2.0 port. 120 frames per second is only possible in 1080p or 1440p, and only if the game offers it. For an adventure game played with a controller, 4K remains the output to favour.

 

Two 4K monitors for the dock

Ocarina of Time is played with a controller, often from a sofa. A 4K monitor of 43 inches or more does the job of a television and receives the Switch 2 at its best resolution.

The JN-i432TUR is a 43-inch IPS 4K monitor at 60 Hz. Its three HDMI 2.0 inputs let the dock stay permanently connected, alongside another console or a computer, and the panel accepts the console's HDR10. The IPS panel keeps its colors when viewed at an angle, which matters when several people are watching the game.

Sizes from 43 to 55 inches, and what they change for the Switch 2 in general, are compared in our article on 43- to 55-inch monitors for the Switch 2.

On a desk, the dock connects just as well to a computer monitor, which can then be used for work.

The JN-IPS2707UHDR, a 27-inch IPS 4K monitor at 60 Hz, receives the Switch 2's 4K output through its HDMI 2.0 port. Its spec sheet lists a contrast of 1300:1, 350 cd/m² and 100% sRGB coverage.

If you would rather play at 120 frames per second, where the game allows it, you need a monitor that accepts 1440p or 1080p at 120 Hz over HDMI. The criteria for a Switch 2 monitor in that case are detailed in our article which monitors to choose for the Switch 2.

On release day, simply set the console's TV output to the highest resolution the monitor accepts, 3840 x 2160 for a 4K monitor, then enable HDR if the monitor supports it.