Mounting your PC monitor on the wall: which mount for your wall type?
Mounting your monitor on the wall isn't a matter of taste; it's a technical decision. Before choosing a mount, the first thing to know is the nature of your wall. Concrete, plasterboard, or wooden walls do not accept the same fixings or the same loads. A mount installed on plasterboard with unsuitable anchors poses a real risk — for the screen and for anything underneath it.
VESA compatibility, load capacity, anchor type, drilling depth: each parameter determines the solidity of the installation. VESA compatibility can be checked directly in the manual or on the back of the monitor. The maximum supported load is indicated for each configuration. If in doubt about the wall structure (load-bearing wall, unidentified partition), the intervention of a professional remains the right decision.
For configurations requiring the best monitor mount adapted to each use, JAPANNEXT offers the JN-A-G210A1W (available in black and white), VESA 75×75 and 100×100 compatible, with a maximum load of 8 kg.
Why mount your monitor on the wall? Concrete advantages
A wall-mounted monitor frees up desk space — an immediate benefit, measurable in square centimeters recovered. Wall mounting eliminates the monitor stand, often cumbersome for 27-inch and larger monitors.
A height-adjustable wall mount for monitors allows for precise positioning, independent of the work surface. It suits setups that alternate between sitting and standing work. An articulated wall-mounted monitor arm adds pivot and tilt capabilities, useful for screen sharing or working in various positions.
A monitor fixed to the wall is more stable than a monitor placed on a desk arm screwed to a thin tabletop: the mass is transferred to the wall, not the furniture.
Concrete, plasterboard, wood: how the wall type changes the mounting method
The type of wall determines the anchor to be used and the maximum acceptable load.
Concrete or solid brick wall: an expansion anchor (Fischer SX type) holds between 80 and 120 kg depending on the diameter and drilling depth. A hammer drill is essential, with a recommended minimum depth of 60 mm. This configuration supports screens up to 49 inches without constraint.
Plasterboard partition (BA13): standard anchors will not hold. A Molly bolt or toggle bolt is required to anchor into the cavity behind the board. Maximum load per point: 15 to 25 kg depending on the model. For screens exceeding 8 kg, prefer chemical anchoring into the partition's metal studs.
Wooden partition: wood screws directly into the studs. Locate the studs with a detector before drilling. Load capacity comparable to concrete if the studs are solid.
To quickly identify the type of wall: tap with your fingers (hollow sound = plasterboard, solid sound = concrete or brick) and test with a magnet — it will stick to the metal studs of a plasterboard partition.
How to check your monitor's compatibility with a wall mount
The necessary condition is the presence of a VESA pattern on the back of the screen. This standard defines the spacing of the mounting holes in millimeters: 75×75, 100×100, and 200×200 are the most common values. This information is found on the back of the screen, in the paper manual, or in the online technical specifications.
Also check the monitor's weight and compare it to the mount's load capacity. A 27-inch monitor wall mount should hold between 4 and 7 kg depending on the model. A 32-inch monitor wall mount requires a capacity of 8 to 10 kg. The maximum nominal load indicated in the mount's specifications is the absolute reference.
Fixed wall mount vs. articulated wall arm: what's the difference?
A fixed wall mount positions the screen at a defined height and angle during installation. Compact, with no mechanical play, it is suitable for fixed workstations.
An articulated wall arm offers horizontal rotation, vertical tilt, and sometimes depth adjustment. The best monitor arm for a dual setup is an articulated dual monitor arm: two monitors on a single wall mounting point, with two independent arms. A dual PC monitor wall mount is suitable for workstations requiring two screens side-by-side without occupying two distinct wall locations.
For curved screens, a curved monitor articulated arm must allow for negative tilt to compensate for the curvature. The curved monitor wall mount must be compatible with the VESA pattern of the screen, which may sometimes not be square on ultrawide models.
Screen sizes and weights: technical criteria to validate before purchase
Diagonal and weight are the two dimensioning variables for the mount:
- 24 inches: 2.5 to 4 kg. Standard wall mount, VESA 75×75 or 100×100 sufficient.
- 27 inches: 3 to 6 kg. VESA 100×100 recommended, mount capacity ≥ 8 kg.
- 32 inches: 5 to 8 kg. VESA 100×100 or 200×200, mount capacity ≥ 10 kg.
- 49 inches: up to 14 kg. 49-inch monitor wall mount with VESA 200×200, concrete fixing essential.
For a wall-mounted smart monitor or a wall-mounted touchscreen computer, verify that the VESA pattern is listed in the technical specifications — some models may have specific configurations outside common standards.
Step-by-step installation: drilling, anchoring, fixing, cable management
Minimum tools: hammer drill (or screwdriver for wood), spirit level, pencil, screwdriver.
- Locate the position on the wall. Check for electrical conduits or pipes (wall detector recommended).
- Mark the drilling points according to the mount template. Check horizontality with a spirit level.
- Drill to the recommended depth (≥ 60 mm in concrete, through in plasterboard). Clean the hole.
- Insert the anchor suitable for the wall type.
- Screw the wall profile. Check stability before hanging the screen.
- Hang the screen. Engage the safety lock if the mount has one.
- Manage cables: adhesive cable raceways, integrated cable management in the mount, or cable ties.
Do not attempt to fix on an identified load-bearing wall yourself, or if in doubt about the nature of the partition.
FAQ — Monitor Wall Mount
How to mount a computer monitor on the wall?
First, identify the type of wall (concrete, plasterboard, wood) and choose the appropriate anchor. Check that the monitor has a VESA pattern. Fix the wall profile to the wall, hang the monitor on this profile, then secure the cables.
How to know if a monitor is compatible with a wall mount?
Check for a VESA pattern on the back of the monitor or in its technical specifications. Common values are 75×75 mm, 100×100 mm, and 200×200 mm. If no VESA pattern is indicated, the monitor is not compatible with a standard wall mount.
Which wall mount for a monitor?
The choice depends on the type of wall, screen size, weight, and usage. A fixed mount is suitable for a static workstation. An articulated arm is preferable for multi-position setups or screen sharing. The mount's load capacity must be greater than the monitor's weight.
How to hang a monitor?
First, fix the wall profile to the wall with appropriate anchors. Screw the VESA adapter to the back of the monitor. Hang the monitor on the profile and engage the locking system. Check stability before plugging in the cables.
How to choose a monitor mount?
Four criteria: VESA compatibility, load capacity (greater than the monitor's weight), wall mounting type suitable for the wall, and desired mobility (fixed or articulated arm). For curved screens, check that the mount allows for negative tilt.
